Adjust the volume, Fax setup – HP Officejet 5605 All-in-One Printer User Manual

Page 21

Advertising
background image

Note

In some countries/regions, the date and time stamp on the fax header is

a legal requirement.

If your HP All-in-One loses power, you need to reset the date and time.
1.

Press

Setup

.

2.

Press

6

, and then press

3

.

This selects

Tools

and then selects

Date and Time

.

3.

Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.

4.

Enter the hours and minutes.

5.

If your time is displayed in the 12-hour format, press

1

for AM, or

2

for PM.

The new date and time settings appear on the control panel display.

Adjust the volume

Your HP All-in-One provides three levels for adjusting the ring and speaker volume.
The ring volume is the volume of the phone rings. The speaker volume is the level of
everything else, such as the dial tones, fax tones, and button press beeps. The default
setting is

Soft

.

1.

Press

Setup

.

2.

Press

4

, and then press

5

.

This selects

Basic Fax Setup

and then selects

Ring and Beep Volume

.

3.

Press to select one of the options:

Soft

,

Loud

, or

Off

.

Note

The beeps you hear when pressing buttons maintain the same

volume whether you choose

Loud

or

Soft

. These two options only affect

ring, dial, and other tones you hear when faxing. If you choose

Off

,

however, the sounds of button presses are also turned off.
If you select

Off

, you will not hear a dial tone, fax tones, or incoming ring

tones. With the

Ring and Beep Volume

set to

Off

, you cannot send a fax

using monitor dialing, such as when using a calling card to send a fax. For
more information on monitor dialing, see

Send a fax using monitor dialing

.

4.

Press

OK

.

Fax setup

After completing all the steps in the Setup Guide, use the instructions in this section to
complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up your HP All-in-One so that faxing works
successfully with equipment and services you might already have on the same phone
line as your HP All-in-One.

Tip

You can also use the

Fax Setup Wizard

(Windows) or

Fax Setup Utility

(Mac) to help you quickly set up some important fax settings such as the
answer mode and fax header information. You can access the

Fax Setup

Wizard

(Windows) or

Fax Setup Utility

(Mac) through the

HP Image Zone

Chapter 3

18

HP Officejet 5600 All-in-One series

Finish

setup

Advertising