5 output via the serial bus, 1 turning the serial interface echo on/off, 2 serial bus settings – Vaisala HMP260 User Manual
Page 32
Advertising
HMP260 SERIES
Operating Manual
HMP260-U017en-1.5
26
1997-11-25
5.3.5
Output via the serial bus
5.3.5.1
Turning the serial interface echo ON/OFF
•
Select More in the main menu, select More in the More menu and
select Echo in the second More menu.
•
Use the arrow keys to select the right alternative and press ENT.
5.3.5.2
Serial bus settings
•
Select Seri in the main menu; the currently valid serial interface set-
tings are displayed:
•
If the settings are correct, press ENT; the programme returns to the
display mode.
•
If the settings need to be changed, press CL:
•
Select the parameter to be changed with the arrow keys and ENT key.
Selecting baud rate:
Selecting parity:
Selecting data bits:
Advertising