Vaisala MMT330 - Manual (Page 98)

User's Guide _______________________________________________________________________
98 ___________________________________________________________________ M210764EN-F
Using Display/Keypad
Use display/keypad to select the display output quantities.
1. Press any of the arrow buttons to open the Main Menu.
2. Press the
► arrow button to select Display.
3. Press
► arrow button to select Quantities.
4. Select the quantity by using the
▲▼ arrow buttons. Confirm the
selection by pressing SELECT. You can select 1 ... 3 display
quantities at a time.
5. Press EXIT to return to the basic display.
To select display units:
1. Press any of the arrow buttons to open the Main Menu.
2. Press the
► arrow button to select Display.
3. Use the
▲▼arrow buttons to select Units. Confirm the selection
by pressing the right-hand arrow button.
4. Use the
▲▼ arrow buttons to select display units. Confirm the
selection by pressing CHANGE. The unit changes from metric to
non-metric or the other way round.
5. Press EXIT to return to the basic display.
NOTE Changing the display quantities/units (by using the display/keypad) has
no effect on the serial output data.
Using Serial Line
FORM
Use the serial line command FORM to change the format or select a
certain quantities for the output commands SEND and R.
FORM [x]<cr>
where
x = Formatter string
If no formatter string is entered, the command will display the currently
active formatter string. Note that the hash symbol "#" is shown as a
backslash "\" when viewing the current formatter string.
Formatter string consists of quantities and modifiers. The MMT330
measures the following quantities: