Kenwood TM-D710GA - Manual (Page 19)

11
k SQL Control
Rotate the [SQL] control to adjust the squelch level. Clockwise tightens the
squelch and counterclockwise opens the squelch.
l DX
Press [DX] to turn the DX PacketClusters Monitor ON and OFF.
m P.IN
Press [P.IN] to enter PM Channel registration mode.
n
Press [ ] to turn the transceiver power ON and OFF.
OPERATION PANEL (REAR & LEFT)
a GPS
Connect the external GPS receiver or the Weather Station to this jack using
the supplied cable with a 2.5 mm (1/10") 3-conductor plug.
b COM
This terminal is for connecting to a PC. Use a PG-5G (option) cable when
connecting the built-in TNC to a computer D-SUB terminal.
c Panel jack
Connect the TX/ RX unit to this jack using the supplied Modular plug cable.