Kenwood TM-D710GA - Manual (Page 29)

21
Frequency ranges:
• 118 MHz: 118 ~ 135.995 MHz • 144 MHz: 136 ~ 199.995 MHz
• 220 MHz: 200 ~ 299.995 MHz • 300 MHz: 300 ~ 399.995 MHz
• 430/440 MHz: 400 ~ 523.995 MHz
• 1200 MHz: 800 ~ 1299.990 MHz (TM-D710GA: excluding cellular band)
SELECTING AN OPERATING MODE
There are 3 operating modes available to choose from: VFO mode, Memory
Channel mode, and Call Channel mode.
■ VFO Mode
VFO mode allows you to manually change the operating frequency.
1 Press [VFO] to enter VFO mode.
2 Rotate the Tuning control to select your desired operating frequency.
• You can also adjust the frequency by using the microphone [UP]/[DWN] keys.
• The default step frequency for the Tuning control varies according to the type
and operating band:
Model 144 MHz 430/440 MHz
TM-D710GA 5 kHz 25 kHz
TM-D710GE 12.5 kHz 25 kHz
• To adjust the frequency by a larger amount, you can press the Tuning control
to enter MHz mode. While in MHz mode, rotate the Tuning control to adjust the
frequency in steps of 1 MHz. Press the Tuning control again to exit MHz mode
and adjust the frequency using the normal step frequency.