Kenwood TM-D710GA - Manual (Page 21)

13
Indicator Description
Appears when the selected channel is non-registered while in
Memory Input mode.
Appears when the selected channel is registered while in
Memory Input mode.
Displays the Memory channel number.
Appears when the Memory Channel Lockout function is ON.
Appears while using High output power.
Blinks when the temperature protection circuit (transmit power
save) turns on.
Appears while using Middle output power.
Blinks when the temperature protection circuit (transmit power
save) turns on.
Appears while using Low output power.
Displays the operating frequency.
Appears when receiving a busy signal.
Performs as an S meter when receiving a signal and displays
the selected power level while transmitting.
Appears while transmitting.
Appears while using the External data band.
Appears while using the Internal data band.
Appears when the data terminal is set as 9600 bps.
Appears when the mute function is ON.
Appears while making a continuous recording.
Appears while in EchoLink Sysop mode.
Appears when the Key Lock function is ON.
Displays the PM channel number.
Appears when Weather Alert is ON.
Blinks when receiving a signal (TM-D710GA only).
Appears when a message is received.
Appears when the Beacon type is set to “APRS”.
Appears when the Beacon type is set to “NAVITRA”.