Kenwood TM-D710GA - Manual (Page 20)

12
DISPLAY
Indicator Description
Clock display
Appears when there is a transmission band available.
Blinks when the cross-band repeater is ON (TM-D710GA only).
Appears when there is an operation band available.
Blinks when the wireless remote control is ON (TM-D710GA
only).
Appears when the Tone function is ON.
Appears when the CTCSS function is ON.
Appears when the DCS function is ON.
Appears when the Cross tone setting is “TONE/CTCSS”.
Appears when the Cross tone setting is “DCS/CTCSS”.
Appears when the Cross tone setting is “TONE/DCS”.
Appears when the Cross tone setting is “DCS/OFF”.
Appears when the Shift function is set to plus.
Appears when the Shift function is set to minus.
Appears when the Reverse function is ON.
Appears when the ASC function is ON.
Blinks when the ASC function is performing an OK check.
Appears while in AM mode.
Appears while in FM mode.
Appears while in Narrow FM mode.
< A Band > < B Band >