Kenwood TM-D710GA - Manual (Page 53)

45
SPECIFICATIONS
Specifi cations are subject to change without notice due to advancements in
technology.
General TM-D710GA TM-D710GE
Guaranteed
range Band
A & B
TX & RX
144 ~ 148 MHz 144 ~ 146 MHz
430~ 450 MHz 430 ~ 440 MHz
Frequency
range
Band A
RX
118 ~ 524 MHz
Band B
136 ~ 524 MHz
800 ~ 1300 MHz
(TM-D710GA: excluding cellular band)
Mode F1D/ F2D/ F3E
Antenna impedance 50

Operating temperature range –20°C ~ +60°C (–4°F ~ +140°F)
Power requirement 13.8 V DC ±15% (Negative ground)
Frequency stability Within ±5 ppm (–10°C ~ +50°C)
Current
TX
VHF
Hi Less than 13.0 A
Mid Less than 5.5 A
Low Less than 4.0 A
UHF
Hi Less than 13.0 A
Mid Less than 6.5 A
Low Less than 5.0 A
RX Less than 1.2 A (at 2 W audio output)
Dimensions
(W x H x D)
Without projections
Operation panel: 155 x 70 x 38 mm (6.10 in x 2.76 in x 1.50 in)
TX/ RX unit: 140 x 43 x 142 mm (5.51 in x 1.69 in x 5.59 in)
With projections
Operation panel: 156 x 71 x 56 mm (6.14 in x 2.80" x 2.20 in)
TX/ RX unit: 140 x 44 x 158 mm (5.51 in x 1.73 in x 6.22 in)
Weight (approx.)
Operation panel: 0.3 k
g (0.7 lb)
TX/ RX unit: 1.2 k
g (2.6 lb)