Videotec SM328B - Manual (Page 35)

In this example M1 is the master monitor, M2 the
public monitor.
Fixed camera C frames the public monitor.
In this example keyboard K directly controls
receiver R to move camera C.
The video input is excluded when a camera is selected on the master monitor.
To return to normal operation request activation of the switching sequence on the master monitor (
q
key).
6.1.1.2 Telemetry mode
Telemetry mode should be used when the receivers are controlled via the switcher/matrix:
In this example M1 is the master monitor, M2 the
public monitor.
Pan & tilt camera C frames the public monitor.
Exclusion is activated when keyboard number 1 (called master) controls video receiver R associated with
an video input, via the Aux lines of the matrix.
This mode allows manual selection of the video inputs on the master monitor without activating exclusion
until pan & tilt movements begin.
Pressing the
q
key will restore normal operating mode.
• 6. Appendix 1: Excluding video inputs Page 33/65 MNVCSM328A_0438