Videotec SM328B - Manual (Page 62)

Click on the “<< Back” button to return to the previous screen.
Click on the “>> Next” button to continue.
8.3.13 Cycling sequences
8.3.13.1 Definition and modification of a cycling sequence
Select the identification number of the cycling sequence that you wish to define or edit by clicking the
arrow of the “Sequence no.” ComboBox and selecting the number required.
Addition of a camera to a cycle. Select the camera you wish to add to the cycle sequence in the “available
cameras ” box. Click on the “>>”” key to add the selected camera to the sequence. Input the display time in
seconds in the “Duration” field of the “Telecamera” box. To add a new camera to the same sequence,
select the camera required and repeat the operation that has just been described
Removal of a camera from a cycle. It is possible to remove a camera from a sequence. Once the
sequence to be modified has been chosen (by means of the identification number), select the camera to
be removed from the “Camera” box and click on the button “<<”.
• 8. Configuration software Page 60/65 MNVCSM328A_0438
figure 19: cycling sequences
Button for adding
a camera from a
cycle
Cycling
sequence
identification
ComboBox
List of cameras
the cycle
consists of
Button for removing
a camera from a
cycle
Selection box
for camera to
be inserted in
the cycling
Cycling selection
ComboBox for
opening hours for
monitor 5
Cycling selection
ComboBox for
closure period for
monitor 5
Input of the
automatic return
in minutes
Insert the
display time in
seconds