Videotec SM328B - Manual (Page 54)

“Master matrix configuration”: a ComboBox appears. From here the total number of slave matrices to be
connected must be configured. The number of video inputs that can be enabled is reduced because there
are four inputs for each slave matrix. Proceed with the enabling and disabling of the video inputs (see
below).
“Slave matrix configuration”: a ComboBox appears. From here, select the number associated with the
slave matrix being configured. Proceed with the enabling and disabling of the video inputs (see below).
"Parallel matrix"Configuration: a ComboBox appears. From here select the number associated with the
matrix being configured. Proceed with the enabling and disabling of the video inputs (see below).
8.3.3.2 Video input enabling
To enable a video input, click on the relative CheckBox inside the “Video inputs (Cameras)” box. Give each
enabled video input a name by keying the name into the relative text field. By default, all the inputs are
enabled (except those for the slave matrices should the master matrix be in the process of configuration).
Click on the “<< Back” button to return to the previous screen.
Click on the “>> Next” button to continue.
• 8. Configuration software Page 52/65 MNVCSM328A_0438