Videotec SM328B - Manual (Page 65)

8.3.15 Timed events
When the “Use timed events” CheckBox is clicked on, it is possible to define timed events for keyboards,
relays and alarm contacts. We will describe the configuration of just those events for the keyboard in this
guide as the other two cases are identical.
The keyboard to which a timed event is assigned is chosen by clicking on the arrow of the “Keyboards”
ComboBox.
To define an event
1. Click on the arrow of the “Action” ComboBox and select the type of action required;
2. Click on the arrow of the “Period” ComboBox and select the desired period.
3. Input the time at which the event takes place in the “Time” field;
4. Click on the “add” key.
5. Return to point 1. (It is possible to define more than one event for each keyboard.)
To edit an event, select the event to be edited, perform the operations described in the previous points
1,2,3 and then click on the “Edit” key.
To cancel an event, select the event and click on the “Delete” key.
Click on the “<< Back” button to return to the previous screen.
Click on the “>> Next” button to continue.
• 8. Configuration software Page 63/65 MNVCSM328A_0438
figure 21: Timed events
Click to define
timed events for
relay
Keyboard
selection
ComboBox
Click to define
timed events for
keyboard
Click to define
timed events for
alarm contacts
Event selected
Action choise
ComboBox
Period choice
ComboBox
Time setting
field
Event addition
button
Event modification
button
Event deletion
button