Campbell Scientific CR3000 Micrologger - Manual (Page 523)

Appendix A. CRBasic Programming Instructions
523
IPTrace
Writes IP debug messages to a string variable.
Syntax
IPTrace(Dest)
NetworkTimeProtocol
Synchronizes the datalogger clock with an Internet time server.
Syntax
variable = NetworkTimeProtocol(NTPServer, NTPOffset,
NTPMaxMSec)
PingIP
Pings IP address.
Syntax
variable = PingIP(IPAddress, Timeout)
PPPOpen
Establishes a PPP connection with a server.
Syntax
variable = PPPOpen
PPPClose
Closes an opened PPP connection with a server.
Syntax
variable = PPPClose
TCPClose
Closes a TCP/IP socket that has been set up for communication.
Syntax
TCPClose(TCPSocket)
TCPOpen
Sets up a TCP/IP socket for communication.
Syntax
TCPOpen(IPAddr, TCPPort, TCPBuffer)
UDPDataGram
Sends packets of information via the UDP communications protocol.
Syntax
UDPDataGram(IPAddr, UDPPort, SendVariable, SendLength,
RcvVariable, Timeout)
UDPOpen
Opens a port for transferring UDP packets.
Syntax
UDPOpen(IPAddr, UDPPort, UDPBuffsize)
WebPageBegin / WebPageEnd
Declares a web page that is displayed when a request for the defined HTML page
comes from an external source.
Syntax
WebPageBegin ("WebPageName", WebPageCmd)