Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 106)

Display Option Description Notes
M/S 3 Conc Trace gas concentration (ppm) of TGA slave #3 1, 5
M/S 4 Conc Trace gas concentration (ppm) of TGA slave #4 1, 5
M/S 1 Conc B Trace gas concentration (ppm) of TGA slave #1, ramp B 2, 5
M/S 2 Conc B Trace gas concentration (ppm) of TGA slave #2, ramp B 2, 5
M/S 3 Conc B Trace gas concentration (ppm) of TGA slave #3, ramp B 2, 5
M/S 4 Conc B Trace gas concentration (ppm) of TGA slave #4, ramp B 2, 5
Notes:
1) If in dual ramp mode the value will be from ramp A. Otherwise it will be the average of ramp A and ramp B.
2) This option is available only in dual ramp mode. If dual ramp mode is switched off while this option is
selected, the graph is changed to show the 10 Hz concentration by default.
3) CSAT3 data are available only if a CSAT3 is attached to the TGA. See section 7.1.
4) CR9000 data are available only if data are being read from a CR9000. See section 7.2.
5) Slave data are available only if a slave TGA is attached. See section 5.3.
106