Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 113)

113
Detector Data to Save to Disk
-----------------------
[ ] Ref Det Signal (graph: 0.00 to 60.00 mV )
[ ] Ref Det Trans (graph: 0.00 to 100.00 % )
[ ] Ref Det Temp (graph: 0.00 to 60.00 øC )
[ ] Ref Det Peltier (graph: 0.00 to 13.00 )
[ ] Ref Det Gain (graph: 0.00 to 0.00 )
[ ] Ref Det Offset (graph: 0.00 to 0.00 )
[ ] Smp Det Signal (graph: 0.00 to 60.00 mV )
[ ] Smp Det Trans (graph: 0.00 to 100.00 % )
[ ] Smp Det Temp (graph: -25.00 to 0.00 øC )
[ ] Smp Det Peltier (graph: 0.00 to 13.00 )
[ ] Smp Det Gain (graph: 0.00 to 0.00 )
[ ] Smp Det Offset (graph: 0.00 to 0.00 )
Analog Data to Save to Disk
-----------------------
[ ] TGA Analog Chan1 (graph: 0.00 to 10.00 V )
[ ] TGA Analog Chan2 (graph: 0.00 to 10.00 V )
[ ] TGA Analog Chan3 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 1 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 2 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 3 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 4 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 5 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 6 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 7 (graph: 0.00 to 10.00 V )
[ ] PC Analog Chan 8 (graph: 0.00 to 10.00 V )