Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 108)

108
Appendix B: Default Parameter File
TGA Parameters File
------------------------------------------
TGA100 Version #: 6.07
Parameter File Version #: 9.00
Parameter Menu: Laser Parameters
---------------------------------------------
Laser operating temperature (K) 0.00 [0..310]
Laser DC current (mA) 0.00 [0..1000]
Laser Modulation current (mA) 0.00 [0..100]
Laser Zero current (mA) 0.00 [0..1000]
Laser High current offset (mA) 0.00 [-200..200]
Laser high current count 8 [0..8]
Omitted data count 20 [4..20]
Laser multimode power (%) 0.00 [0..100]
Maximum laser temperature rating (K) 0.00 [0..310]
Maximum laser current rating (mA) 0.00 [0..1000]
Line Lock Disable Limit 95 [0..100]
Laser temperature slope (K/V) 0.00 [-500..0]
Laser temperature offset (K) 999.00 [0..1000]
Laser heater control gain 0.40 [0..10000]
Laser heater control zero (Hz) 0.025 [0..100]
Laser heater control pole (Hz) 0.001 [-100..100]
Parameter Menu: Detector Parameters
---------------------------------------------
Sample detector operating temp (deg C) -20.00 [-80..20]
Sample detector gain 0 [0..55]
Sample detector offset 0 [0..4095]
Sample detector linearity coeff 0.000 [-1000000..1000000]
Reference det operating temp (deg C) -20.00 [-80..20]
Reference detector gain 0 [0..7]
Reference detector offset 0 [0..4095]
Reference detector linearity coeff 0.000 [-1000000..1000000]
SMP thermistor Rzero -4.9510 [-500..500]
SMP thermistor gain 4369.0000 [1000..4000000]
SMP thermistor offset 339.7490 [-10000..10000]
SMP PID control gain 0.0250 [-10..10]
SMP PID control tau 4.0000 [-100..100]
REF thermistor Rzero -4.9510 [-500..500]