Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 36)

3.5.1 Standard Parameter Screens
Most of the parameter screens have three columns, containing the parameter name, value, and allowable range, as
shown in Figure
. The selected parameter value is highlighted and a corresponding prompt is displayed at the
bottom of the screen. Use the <up/down arrow> keys to select the parameter to be edited. To change the selected
parameter’s value, type the new value and press <enter> or the <up/down arrow> keys. To cancel a change while
typing in a new value, press the <escape> key. To return to the main menu press the <escape> key.
Figure 3-4
Figure 3-4. Example Parameter Screen
36