Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 109)

109
REF thermistor gain 4369.0000 [1000..4000000]
REF thermistor offset 339.7490 [-10000..10000]
REF PID control gain 0.0250 [-10..10]
REF PID control tau 4.0000 [-100..100]
Parameter Menu: Ramp B Parameters
---------------------------------------------
Dual ramp control: 0=off, 1=on 0 [0..1]
Ramp B Gas mnemonic GasB
Ramp B Reference gas conc (ppm) 0.00 [0..9999999]
Standard isotope ratio 0.0000000 [0..1]
Heavy isotope in Ramp A (0) or B (1) 1 [0..1]
Ramp B offset current (mA) 0.00 [-100..100]
Ramp B Modulation Current (mA) 0.00 [0..100]
Ramp B High current (mA) 0.00 [-200..200]
Ramp B laser multimode power (%) 0.00 [0..100]
Ramp B Smp detector linearity coeff 0.000 [-1000000..1000000]
Ramp B Ref detector linearity coeff 0.000 [-1000000..1000000]
Parameter Menu: Concentration Calculation Parameters
---------------------------------------------
Gas mnemonic Gas
Reference gas concentration (ppm) 0.00 [0..9999999]
Length of long sample cell (cm) 153.08 [0..200]
Length of short sample cell (cm) 0.00 [0..200]
Length of reference cell (cm) 4.52 [0..200]
Concentration calculation algorithm 3 [3..3]
Number of samples for fringe filter 0 [0..0]
Fringe width parameter 300 [0..40000]