Campbell Scientific T.Weather T107 Toro Weather Station - Manual (Page 58)

T107 Weather Station
FIGURE 2-42. Side View of Solar Panel Shows Tilt Angle
b) After determining the tilt angle, loosen the two bolts that attach the
mounting bracket to the panel. Adjust the angle, then tighten the bolts.
Secure the lead wire to the mast using wire ties as show in FIGURE 2-42.
Connect the plug at the end of the solar panel cable to the connector
marked “Power”. Make sure the plug is fully seated and the locking ring
turned clockwise until it stops.
Schematics for the solar panel cable are in Section 4.3.2, Power
Schematics.
NOTE
α
50