Campbell Scientific T.Weather T107 Toro Weather Station User Manual
Page 89
Advertising
Appendix B. PS24 24 Ahr Power Supply and 10 x 12 inch Enclosure
7. Install the solar panel above the 10 x 12 enclosure, and face the solar panel
south. See FIGURE B-9 for fully mounted solar.
FIGURE B-9. Mounted Solar Panel
8. Throw a blanket or box over the solar panel to prevent any voltage output.
9. Route the solar panel cable and power cable coming from the main T107
enclosure into the conduit at the bottom of the 10 x 12 enclosure.
Leave a loop of all cables under the 10 x 12 enclosure to act as a
drip line. Cut both cables to whatever length you need. It doesn’t
hurt to leave a loop of cable inside the enclosure.
IMPORTANT
B-9
Advertising