Et software, 47. desiccant installation – Campbell Scientific T.Weather T107 Toro Weather Station User Manual
Page 62
T107 Weather Station
FIGURE 2-47. Desiccant Installation
3. ET Software
The T107 comes with a default program, and typically does not
require additional programming (see Appendix D).
A variety of different software packages are available to work with the T107
station. This section introduces software packages that can be used with the
T107 station. It is not the goal to fully explain capabilities of each package. All
software packages mentioned below come with extensive help files. Contact
Campbell Scientific with questions and support. All software includes
installation instructions.
For Toro T.Weather 3.0 or higher, contact Toro NSN for support at (800) 275-
8676.
PC200W is free software which is used to communicate with a direct connect
or short-haul modem station and collect data. PC200W software cannot be used
to communicate with stations on a phone modem. This software can be
downloaded from Campbell Scientific’s websit
NOTE
Desiccant
54