67 _ english 臺灣 _ 67 – Samsung SC-DX103-XAP User Manual

Page 73

Advertising
background image

• 在室內的各種光線條件(自然光線、螢光燈、燭光等)下都可

拍攝主體。由於色彩溫度因光源而異,因此主體色調會因白平

衡設定而有所不同。使用此功能獲取更自然的效果。

• 在設定白平衡之前,建議指定「

Digital Zoom:Off」( 第 76 頁)

• 在設定白平衡時切勿使用彩色物體:無法設定適當的色調。
• 在 EASY Q 模式下,此功能將被設定為「

Auto」。

• 在燈光條件變更時重設白平衡。
• 在進行普通戶外錄製期間,設定為自動將可提供更佳效果。

Exposure

DVD 攝錄放影機通常會自動調整曝光。根據錄製條件您還可手動調整
曝光。

設定

內容

畫面顯示語

Auto

根據環境光照條件,此選項會自動調整影像亮度。

Manual

您可以手動調整影像亮度。在主體太亮或太暗時調整亮
度。

xx

手動設定曝光:

在手動設定曝光時,在根據環境光照條件自動調整值
時會出現預設值。
1. 在檢視 LCD 螢幕上的影像時,向右或向左移動

以調整曝光度。
- 曝光值可設定在「

0」和「29.」之間。

2. 按下搖桿

- 將會套用手動曝光設定和顯示 (

xx

) 指示

器。

3. 若要結束,可重複按下搖桿直到 OK 導向器消失。

67_ English

臺灣

_

67

A subject can be shot under various types of lighting conditions

indoors (natural, fl uorescent, candlelight, etc.). Because the

color temperature is different depending on the light source, the

subject tint will differ depending on the white balance settings.

Use this function for a more natural result.

• It is recommended that you specify “

Digital Zoom: Off

(page 76) before setting white balance.

• Do not use a colored object when setting white balance: The

appropriate tint cannot be set.

• This function will be set to “

Auto” in the EASY.Q mode.

• Reset the white balance if lighting conditions change.

• During normal outdoor recording, setting to auto may provide

better results.

Exposure

The DVD camcorder usually adjusts the exposure automatically. You

can also manually adjust the exposure depending on the recording

conditions.

Settings

Contents

On-screen

display

Auto

This option automatically adjusts image brightness

according to the environmental light conditions.

None

Manual

You can adjust the brightness of an image

manually. Adjust the brightness when the subject

is too bright or too dark.

xx

Setting the exposure manually:

When manually setting the exposure, the default

setting appears as the value is automatically adjusted

according to the environmental light conditions.

1. Move the Joystick right or left to adjust the

exposure while viewing the image on the LCD

screen.

- Exposure value can be set between “

0” and

29.”

2. Press the Joystick.

- The manual exposure setting will be applied and (

xx

)

indicator is displayed.

3. To exit, press the Joystick repeatedly until the OK guide

disappears.

STBY

0:00:00 [30 min]

23

Eng+Tai_SC.indb 67

2008-03-05 ¿АИД 8:26:16

Advertising
This manual is related to the following products: