Samsung SC-DX103-XAP - Manual (Page 79)

Wind Cut
在從內置麥克風錄製聲音時，可以減少風聲。
如果將「
Wind Cut」設定為「On」，則會在錄製期間消除以下麥克風中的
有聲低頻元件：這會在播放時更加容易聽到噪音和聲音。
• 在沙灘等有風吹的地方錄製時，請使用消除風聲功能。
設定 內容 畫面顯示語言
Off 停用功能。 無
On 在錄製時最小化風聲或其他噪音。
• 在希望麥克風的收音能儘量敏感時，確保將「 Wind Cut」設定
為「 Off」。
• 消除風聲功能僅能與內置麥克風配合在 DVD 攝錄放影機錄製
模式下操作。
Back Light
在主體從後面亮起時，此功能將會補償光線以使主體不太暗淡。
設定 內容 畫面顯示語言
Off 停用功能。 無
On
- 進行背光補償。
- 背光補償可快速加亮主體。
在主體比背景暗時，背光會影響錄製效果：
- 主體位於窗前。
- 將被錄製的人穿著白色或亮色服飾，並
處於明亮的背景中 ﹔ 此人的臉龐將顯得
太暗而無法辨別其五官。
- 主體在戶外，而背景陰暗。
- 光源太亮。
- 主體處於雪景中。
在 EASY Q 模式下，此功能將被設定為「 Off」。
73_ English 臺灣 _ 73
Wind Cut
You can reduce wind noise when recording sound from the built-in
microphone.
If “ Wind Cut” is set to “On,” the low-frequency components in the sound
picked up by the microphone will be cut off during recording: this makes it
easier to hear voices and sound during playback.
• Use the Wind Cut when recording in windy places such as a beach.
Settings Contents
On-screen
display
Off Disables the function. None
On
Minimizes wind noise or other noise while
recording.
• Make sure the “ Wind Cut” is set to “Off” when you want the
microphone to be sensitive as possible.
• The Wind Cut function works only in the DVD camcorder record
mode with the built-in microphone.
Back Light
When subject is lit from behind, this function will compensate for lighting so
that the subject is not too dark.
Settings Contents
On-screen
display
Off Disables the function. None
On
- Backlight compensation is executed.
- Backlight compensation brightens the subject
quickly.
Back lighting influences recording when the subject is darker than the
background:
- The subject is in front of a window.
- The person to be recorded is wearing
white or shiny clothes and is placed
against a bright background; the person’
s face is too dark to distinguish his/her
features.
- The subject is outdoors and the
background is overcast.
- The light sources are too bright.
- The subject is against a snowy
background.
This function will be set to “ Off” in the EASY.Q mode.
<Back Light on> <Back Light off>
Eng+Tai_SC.indb 73 2008-03-05 ¿АИД 8:26:23