Allied Telesis AT-UWC Series - Manual (Page 170)

AT-UWC WLAN Controller Web GUI User’s Guide
170
3. Select the wireless network interface from the select list.
The information about the selected wireless network interface is
displayed.
4. Observe the fields described in Table 56.
5. If you want to view the most current information, click Refresh.
CP - Client Status To view a list of AP clients that connected through a Capital Portal profile,
do the following:
1. From the Navigation pane, go to Security > Captive Portal > Client
Connection Status.
The Client Summary page is displayed.
2. Click the CP - Client Status tab.
The CP - Client Status page is displayed.
3. Select the CP profile from the select list.
A list of AP clients that are connected through the selected CP profile
is displayed.
4. Observe the fields described in Table 57 on page 171.
Table 56. Interface - Client Status
Field Description
MAC Address Displays the MAC address of the AP client. When the
* symbol is marked at the end of the MAC address,
the AP client was authenticated by the peer
controller.
IP Address Displays the IP address of the AP client.
Interface Displays the interface that the AP client is using.
Protocol Displays the protocol that is connected through:
HTTP or HTTPS.
Verification Displays the account type. The options are:
 Guest
 Local
 RADIUS