Allied Telesis AT-UWC Series - Manual (Page 281)

Chapter 5: Wireless LAN
281
Figure 141. AP Triangulation Status Page
4. Observe the fields described in Table 116 on page 281.
5. If you want to refresh the display, click Refresh.
Table 116. AP Triangulation Status
Field Description
Sentry Displays the sentry mode of the access point. The
options are:
 Sentry
 Not Sentry
MAC Address Displays the MAC address of the access point or
VAP.
Radio Displays the radio band that the access point is
detected in.
RSSI (%) Displays Received Signal Strength Indication
(RSSI) of the non-sentry access point in
percentage. RSSI is a measurement of the power
represent in a received radio signal.
Signal Strength
(dBm) Displays Received Signal Strength Indication
(RSSI) of the non-sentry AP in dBm.
Noise Level
(dBm) Displays the noise level that the non-sentry access
point reported.
Age Displays the time period since the last RF scan that
the access point was detected.