Allied Telesis AT-UWC Series - Manual (Page 218)

AT-UWC WLAN Controller Web GUI User’s Guide
218
Figure 115. Managed AP Channel/Power Adjust Page
3. Specify the fields described in Table 79.
Table 79. Managed AP Channel/Power Adjust
Field Description
AP MAC address Displays the MAC address of the access point.
Radio Displays the radio band of the access point.
Channel Status Displays the status of channel status of the access
point. The options are:
 None - No setting.
 Set Requested - The request is made.
 Set Complete - The process of enabling or
disabling is complete.
Channel Select the channel from the select list. When Auto is
selected, the WLAN Controller adjust the channels
of the access points to reduce radio interference.
When the access point reboots or the AP profile is
applied to the access point, the manually specified
channel is overwritten.
Power Status Displays the power status of the access point. The
options are:
 None - No setting.
 Set Requested - The request is made.
 Set Complete - The process of enabling or
disabling is complete.
Power (%) Change the power level. The range is 1 to 100%.