Allied Telesis AT-UWC Series - Manual (Page 96)

AT-UWC WLAN Controller Web GUI User’s Guide
96
Ping
From the Ping page, you can test network connections between the
WLAN Controller and the destination using the ping utility.
To test network connections using the ping utility, do the following:
1. From the Navigation pane, go to System > System Utilities > Ping.
The Ping page is displayed as shown in Figure 56.
Figure 56. Ping Page
2. Specify the following fields in Table 21.
. Table 21. Ping
Field Description
Host Name/IP
Address Specifies the destination with the host name or
IPv4 address.
Count Specifies how many time to send request packets.
The default is 1 time.
Interval Specifies time in seconds to wait before sending
another request packet.