Allied Telesis AT-UWC Series - Manual (Page 65)

Chapter 2: System
65
Persistent Log Configuration
From the Persistent Log Configuration page, you can enable or disable the
Persistent Log feature.
When the Persistent Log feature is enabled, the system stores log
messages in a file on the hard disk. The system creates a new log file
when rebooting. When the system has three log files, it replaces the oldest
log file with a new.
Note
To download persistent log messages, see “Upload File from
Controller” on page 90.
To enable or disable the Persistent Log feature, do the following:
1. From the Navigation pane, go to System > Logs > Persistent Log
Configuration.
The Persistent Log Configuration page is displayed as shown in
Figure 39.
Figure 39. Persistent Log Configuration Page
2. Select the options in the fields described in Table 10 on page 66.