Allied Telesis AT-UWC Series - Manual (Page 263)

Chapter 5: Wireless LAN
263
Viewing the
Status of VAP
To view the VAP status of the AP clients and disassociate an AP client
form the wireless network, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics >
Associated Client and click the VAP Status tab.
The Associated Client VAP Status page is displayed.
2. Observe the fields described in Table 103.
3. If you want to disconnect an AP client, check the checkbox next to the
MAC address of the AP client.
4. Click the following buttons as needed:
 Disassociate — Disconnect the selected AP client from the
access point.
 Refresh — Refreshes the display on this page.
Viewing the
Status of
Controller
To view the status of the WLAN Controller that manages the access point
which AP client is associated with and disassociate an AP client form the
wireless network, do the following:
1. From the Navigation pane, go to WLAN > Status/Statistics >
Associated Client and click the Controller Status tab.
The Associated Client Controller Status page is displayed.
2. Observe the fields described in Table 104 on page 264.
Table 103. Associated Client VAP Status
Field Description
BSSID Displays the MAC address of the VAP on the
access point that the AP client is associated with.
AP MAC
Address Displays the MAC address of the access point.
Location Displays the location information set to the AP
profile.
Radio Displays the radio band of the wireless network
interface.
Client MAC
Address Displays the MAC address of the AP client.