Allied Telesis AT-UWC Series - Manual (Page 350)

AT-UWC WLAN Controller Web GUI User’s Guide
350
3. Click the following buttons as needed:
 Refresh — Refreshes the display on this page.
 Submit — Makes the changes effective and saves them to the
running configuration file.
Note
To save your changes to the startup configuration file, see “Save All
Applied Changes” on page 39.
Captive Portal Check the checkbox to specify the Captive Portal
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “CP Global Configuration” on page 138.
RADIUS Client Check the checkbox to specify the RADIUS Client
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “RADIUS Configuration” on page 172.
WDS Group Check the checkbox to specify the WDS Group
configuration of the WLAN Controller to be
downloaded to the peer controllers.
See “WDS Group Configuration” on page 359.
Table 144. Peer Controller Configuration Enable/Disable (Continued)
Field Description