Allied Telesis AT-UWC Series - Manual (Page 233)

Chapter 5: Wireless LAN
233
4. Click the following buttons as needed:
 Delete — Deletes the selected access points from the list. You can
delete only the access points with the Failed status.
 Delete All — Deletes all the access points with the Failed status.
 Refresh — Refreshes the display on this page.
Location Displays the location information of the access
point.
IP Address Displays the IP address of the access point.
Profile Displays the AP profile that the WLAN Controller
applies to the access point.
Software Version Displays the software version of the access point.
Status Displays the status of the access point. The options
are:
 Discovered - Discovered but not
authenticated.
 Authenticated - Authenticated, but an AP
profile is not applied.
 Managed - Managed by he WLAN
Controller and operating.
 Failed - Failed to connect.
Configuration
Status Displays the status of applying an AP profile to the
access point. The options are:
 Not Configured
 In Progress
 Success
 Partial Success - The access point has an
error with the AP profile, but is operating.
 Failure - The access point has an error with
the AP profile and fails to operate.
Age Displays the time period since the access point
connected to the WLAN Controller.
Table 84. Managed Access Point Status (Continued)
Field Description