Allied Telesis AT-UWC Series - Manual (Page 316)

AT-UWC WLAN Controller Web GUI User’s Guide
316
WLAN Advanced Configuration > Networks
From the Networks page, you can add or delete wireless network that the
WLAN Controller manages.
The WLAN Controller has 16 wireless networks by default. You can
modify these properties, but cannot delete them. You can add up to 239
wireless networks. With the default wireless networks, the WLAN
Controller can have total 255 wireless networks.
Adding a
Wireless Network
To add a wireless network to the list, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
Networks.
The Wireless Network Summary page is displayed as shown in
Figure 157.
Figure 157. Wireless Network Summary Page
2. Enter the SSID in the text box.
3. Click Add.
The Wireless Network Configuration page is displayed as shown in
Figure 158 on page 317.