Allied Telesis AT-UWC Series - Manual (Page 308)

AT-UWC WLAN Controller Web GUI User’s Guide
308
WLAN Advanced Configuration > Distributed Tunneling
From the Distributed Tunneling Configuration page, you can modify the
settings for Distributed Tunneling.
To modify the settings for Distributed Tunneling, do the following:
1. From the Navigation pane, go to WLAN > Advanced Configuration >
Global and click the Distributed Tunneling tab.
The Distributed Tunneling Configuration page is displayed as shown in
Figure 152.
Figure 152. Distributed Tunneling Configuration Page
2. Specify the fields described in Table 130.
Table 130. Distributed Tunneling Configuration
Field Description
Distributed
Tunnel Clients Specifies the maximum number of AP clients that
are allowed to roam.
Distributed
Tunnel Idle
Timeout Specifies the time period in seconds that the
roaming client is disconnected after the client
stopped communicating.
Distributed
Tunnel Timeout Specifies the time period in seconds that the AP
client can roam before the client is forced to be
disconnected.