Using a swab, Figure 55. lint-free and alcohol-free swabs, Cleaning a recessed ferrule – Allied Telesis AT-CM70S User Manual

Page 109

Advertising
background image

Converteon Media Converter Line Cards Reference Guide

109

Using a Swab

Specially treated swabs (stick cleaners), shown in Figure 55, are for
cleaning inside connector adapters or hard-to-reach ferrule tips. These
swabs, often referred to as “lint free” or “alcohol free” swabs, are available
from many vendors. Stick cleaners are available in both
2.5 mm and 1.25 mm sizes for use on SC and MU connectors
respectively.

Note

NEVER use a household cotton swab and/or alcohol to clean a fiber
optic connector. This may leave a residue on the ferrule tip.

Figure 55. Lint-Free and Alcohol-Free Swabs

Note

Do not use compressed air or aerosol air to clean a fiber optic
connector.

To clean a recessed ferrule using a swab, perform the following
procedure.

1. Insert the swab into the adapter as shown in Figure 56 and rub the

ferrule tip with the swab.

Figure 56. Cleaning a Recessed Ferrule

2. If desired, repeat step 1.

157

Advertising
This manual is related to the following products: