Allied Telesis AT-CM70S - Manual (Page 55)

Converteon Media Converter Line Cards Reference Guide
55
AT-CM70S Line
Card
The AT-CM70S line card, shown in Figure 13, features only the Diagnostic
Mode DIP Switch.
Figure 13. Diagnostic Mode DIP Switch on an AT-CM70S Line Card
Table 18 lists the positions of the Diagnostic Mode DIP Switch, located on
the base board of the AT-CM70S line card.
“X” means the DIP switch position could be either ON or OFF.
FCC Part 68
Customer
Information
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. For additional information, refer to
“FCC Part 68 Customer Information” on page 116.
Table 18. AT-CM70S Series – Diagnostic Mode DIP Switch Positions
Operating Mode DIP 1 DIP 2
Link Test (non-OAM) OFF X
OAM Bypass ON OFF
OAM Visible ON ON
Manufacturing Default Settings OFF OFF
AT-CM
70S
LK O AM
S
F
P
CPU RE SET
C
O
N
S
O
L
E
L/A FD 100
2
AIS 1 2 3 4
1 2 3 4
4
3
LOTC NML
1
RCL
NML
T
X
RDY
T1/E1
TEST 902
1 2 ON
Operating Mode
DIP Switches on
Base Board