Allied Telesis AT-CM70S - Manual (Page 24)

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards
24
AT-CV1KSS The AT-CV1KSS, shown in Figure 5, is a Gigabit fiber-to-fiber media
converter line card used for Ethernet based networks. The line card
features two small form-factor pluggable (SFP) transceiver slots. Each
SFP slot can accommodate one SFP transceiver that operates at a fixed
operating speed of one Gigabit. The line cards are hot-swappable into and
out of the chassis.
Each AT-CV1KSS line card features the following:
ˆ Two SFP expansion slots (SFP transceiver sold separately)
Refer to “SFP Expansion Slots” on page 35
ˆ Port and system status LEDs
Refer to “Fiber Optic Port LEDs” on page 38
ˆ DIP switches
Refer to “DIP Switches” on page 44
Figure 5. AT-CV1KSS Line Card
The AT-CV1KSS line card features two SFP slots. Each SFP slot can
accommodate one fiber or one copper SFP transceiver that operates at a
fixed operating speed of one Gigabit.
For proper operation in the MissingLink™ and Smart MissingLink mode
configured with copper SFPs, the AT-CV1KSS requires to have copper
SFP transceiver that supports LOS (RXLOS) signal.
(For a list of SFP transceivers that can be used with the AT-CV1KSS line
card, refer to the Converteon™ Media Converter Line Cards Reference
Guide.)
521
3K
1 2 3 4
SW 2
AT-CV1
KSS
LK AT
LK A T
SML M L
RDY
S
F
P
S
F
P
SFP Expansion Slots
SFP Transceiver LEDs
Line Card LEDs
DIP Switches