Allied Telesis AT-CM70S - Manual (Page 19)

Converteon Media Converter Line Cards Reference Guide
19
Line Card Descriptions
AT-CM20x Series
The AT-CM20x Series line cards are 10/100 Mbps copper-to-fiber media
converter line cards. These line cards can be installed in any of the
Converteon™ Media Converter chassis, including the AT-CV5000,
AT-CV1000, and AT-CV1200. Each line card features one fiber optic port
and one copper twisted pair port. The fiber optic port operates at a fixed
operating speed of 100 megabits per second (Mbps) and the twisted pair
port operates at 10 or 100 Mbps speed. The fiber optic port is IEEE
802.3ah-compliant and has either a dual ST or a dual SC connector with a
maximum operating distance from 2 kilometers (1.24 miles) to 40
kilometers (24.8 miles), depending on the model. The twisted pair port has
an RJ-45 connector and a maximum operating distance of 100 meters
(328 feet). Both ports feature half- or full-duplex mode operation. The line
card is hot-swappable into and out of the chassis.
Each AT-CM20x Series line cards feature the following:
ˆ One 100Base-FX fiber optic port with a dual ST or SC connector
Refer to “100Base-FX Fiber Optic Ports” on page 27
ˆ One 10/100Base-TX twisted pair port with an RJ-45 connector
Refer to “10/100Base-TX Twisted Pair Ports” on page 29
ˆ Port and system status LEDs
Refer to “Fiber Optic Port LEDs” on page 38
ˆ DIP switches
Refer to “DIP Switches” on page 44
Figure 1. AT-CM202 Line Card
246
3K
1 2 3 4 3K
1 2 3 4
SW 1
SW 2
AT-CM20
2
LK AT
T
X
SML ML
RDY
LK AT FD
T
X
M
M
R
X
OAM
Fiber Optic Port
RJ-45 Port
Fiber Optic Port LEDs
Twisted Pair Port LEDs
Line Card LEDs
DIP Switches