Dip switches, Link test, Missinglink – Allied Telesis AT-CM70S User Manual

Page 44: Link test missinglink

Advertising
background image

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards

44

DIP Switches

Some of the Converteon™ line cards support the following features by
configuring their DIP switches:

ˆ

Link Test

ˆ

MissingLink™ Mode

ˆ

Smart MissingLink Mode

ˆ

OAM Capability

Note

For additional information on how the Link Test (LK), MissingLink
(ML), and Smart MissingLink (SML) LEDs function on the
Converteon™ line cards, refer to “Link Test, MissingLink™, and
Smart MissingLink LED Functionalities” on page 98.

Link Test

The link test is a fast and easy way for you to test the connections
between the converter ports and the end-nodes that are connected to the
ports. If a network problem occurs, you can perform a link test to
determine which port is experiencing a problem, and so be able to focus
your troubleshooting efforts on the cable and end-node where the problem
resides.

The LK LED for the twisted pair port should be green, indicating that it was
able to establish a link with its end-nodes. If the LK LED is off, the port
could not establish a link. Refer to “Troubleshooting” on page 83 for
suggestions on how to remedy the problem.

For more information on how the LK LED functions, refer to “Link Test,
MissingLink™, and Smart MissingLink LED Functionalities” on page 98.

Performing a link test does not interfere with a converter’s ability to pass
network traffic.

MissingLink™

The MissingLink™ feature enables the ports on the media converter to
pass the “Link” status of their connections to each other. When the media
converter detects a problem on one of the ports, such as the loss of
connection to an end-node, the media converter shuts down the
connection to the other port, thus notifying the end-node that the
connection has been lost.

For more information on how the ML LED functions, refer to “Link Test,
MissingLink™, and Smart MissingLink LED Functionalities” on page 98.

For example, if the twisted pair cable to the 10/100Base-TX port on the
media converter were to fail, the unit would respond by dropping the link

Advertising
This manual is related to the following products: