Allied Telesis AT-CM70S - Manual (Page 52)

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards
52
AT-CV10x Series
Line Cards
The AT-CV10x series line cards, shown in Figure 11, feature both
Diagnostic Mode DIP Switch 1 and Port Configuration DIP Switch 2.
Figure 10. DIP Switches on an AT-CM20x Series Line Card
Table 16 lists the positions of the Diagnostic Mode DIP Switch 1 for the
twisted pair port on the AT-CV10x Series line card.
“X” means the DIP switch position could be either ON or OFF.
Table 15 lists the positions of the Port Configuration DIP Switch 2 for the
twisted pair port on the AT-CV102 line card.
“X” means the DIP switch position could be either ON or OFF.
Table 14. AT-CV10x Series – Diagnostic Mode DIP Switch 1 Positions
Operating Mode DIP 1 DIP 2 DIP 3 DIP 4
Link Test (default) OFF OFF X X
Smart MissingLink (SML) OFF ON X X
MissingLink™ (ML) ON OFF X X
Manufacturing Default Settings OFF OFF OFF OFF
Table 15. AT-CV10x Series – Port Configuration DIP Switch 2 Positions
Operating Mode DIP 1 DIP 2 DIP 3 DIP 4
Auto MDI-X Enabled (default) X OFF X X
Manufacturing Default Settings OFF OFF OFF OFF
289
3K
1 2 3 4 3K
1 2 3 4
SW 1
SW 2
AT-CM202
LK AT
T
X
SML ML O AM
RDY
LK AT FD
T
X
M
M
R
X
3K
1 2 3 4 3K
1 2 3 4
SW1
SW2
Port Configuration
DIP Switches 2
Diagnostic Mode
DIP Switches 1