Using one at-wl2411 in a simple wireless network – Allied Telesis AT-WL2411 User Manual
Page 112
Configuring the IEEE 802.11b Radio
112
Using One AT-WL2411 in a Simple Wireless Network
You can use the AT-WL2411 to extend your existing Ethernet network to
include wireless end devices. The access point connects directly to your
wireless network and the end devices a wireless extension of the wired
LAN.
Figure 39 A Simple Wireless Network
In a simple wireless network, the access point that is connected to he
wired network serves as a transparent bridge between the wired
network and wireless end devices.
To install a simple wireless network, perform the following procedure:
1.
Configure the initial IP address. For help, refer to
2.
Install the access point. For help, refer to
3.
Configure the Ethernet network. For help, refer to
4.
Configure the radios. For help, refer to
H
ost
Access
Point
Ethernet