Allied Telesis AT-WL2411 - Manual (Page 69)

AT-WL2411 Version 1.80 Installation and User’s Guide
69
4. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar and then
Save Changes and Reboot. For help, see
Saving Your Configuration
Changes on page 46.
Using
Predefined
Subtype Filters
You can configure the access point to pass or drop certain predefined
frame subtypes.
To configure predefined subtype filters, perform the following
procedure:
1. From the Main Menu, select Ethernet and then Predefined Subtype
Filters. The Predefined Subtype Filters screen as shown in Figure 24
is displayed.
Figure 24 Predefined Subtype Filters Screen
2. In each Allow/Pass field, check or uncheck the boxes to choose Allow
or Pass.