Allied Telesis AT-WL2411 - Manual (Page 211)

AT-WL2411 Version 1.80 Installation and User’s Guide
211
Global RF
Parameters
Menu Defaults
Parameter Name Range Default
Perform RFC1042/DIX
Conversion Check/Clear Check
S-UHF Rfp Thershold
Set Globally Enable/Disabled Disabled
Value 0 to 250 bytes 70 bytes
S-UHF Frag Size
Set Globally Enable/Disabled Disabled
Value 50 to 250 bytes 250 bytes
902 MHz Frag Size
Set Globally Enable/Disabled Disabled
Value 50 to 250 bytes 250 bytes
S-UHF/902 MHz Awake Time
Set Globally Enable/Disabled Disabled
Value 0 to 250 tenths of a
second 10 (902 MHz)
20 (S-UHF)
RFC1042 Types to Pass Through
1 Two sets of
hexadecimalpairs 00
through FF. 80 F3
2 Two sets of
hexadecimal pairs 00
through FF 81 37
3 through 20 Two sets of
hexadecimal pairs 00
through FF 00 00