Allied Telesis AT-WL2411 - Manual (Page 144)

Configuring Security
144
Configuring the
Access Point to
Use a Password
Server
If you use a password server to manage users who can log in to the
AT-WL2411, you need to tell this access point how to communicate with
the password server and then you need to configure the password
server.
To configure the access point to use a password server, perform the
following procedure:
1. From the Main Menu, select Security then Passwords. The
Passwords screen as shown in Figure 56 is displayed.
Figure 56 Password Screen
2. Check the Use RADIUS for Login Authorization box then select
Submit Changes.
3. Configure the password parameters. The password parameters are
described below.
Use RADIUS for Login Authorization
Determines if you are using a password server to authenticate end
devices that communicate with this access point. Check this check
box to use a password server.