Allied Telesis AT-WL2411 User Manual
Page 124
Advertising
Configuring the IEEE 802.11b Radio
124
a. From the Main Menu select Spanning Tree Settings. The
Spanning Tree Settings screen as shown in Figure 50 is displayed.
Figure 50 Spanning Tree Setting Screen
b. In the Root Priority field enter a number other than 0.
c. In the Secondary LAN Bridge Priority field enter 0.
d. Select the down arrow on the right side of the Secondary LAN
Flooding field and choose Disabled.
8.
If the roaming end device will be roaming across an IP router, you
must configure IP tunnels. For help, refer to
9.
Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar and then
select Save Changes and Reboot. For help, see
Advertising