Allied Telesis AT-S60 - Manual (Page 139)

137
Chapter 13
STP Commands
This chapter contains the following commands:
❑ ACTIVATE STP on page 138
❑ DISABLE STP on page 139
❑ ENABLE STP on page 140
❑ RESET STP on page 141
❑ SET STP on page 142
❑ SET STP PORT on page 145
❑ SHOW STP on page 147
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information on the Spanning Tree Protocol (STP).