Allied Telesis AT-S60 - Manual (Page 81)

AT-S60 Command Line User’s Guide
79
DISABLE SNMP COMMUNITY
Syntax
disable snmp community=community
Parameters
community Specifies an SNMP community string to disable on
the switch.
Description
This command disables a community string on the switch, while leaving
SNMP and all other community strings active. Any IP addresses of
management stations or trap receivers assigned to the community
string are also disabled. A disabled community string cannot be used by
a management workstation to access the switch.
Example
The following command deactivates the SNMP community string
“sw1200” and the IP addresses of management stations and trap
receivers assigned to the community string:
disable snmp community=sw1200