Allied Telesis AT-S60 - Manual (Page 71)

69
Chapter 5
SNMP Community Strings and
Trap Commands
This chapter contains the following commands:
❑ ADD SNMP COMMUNITY on page 70
❑ CREATE SNMP COMMUNITY on page 72
❑ DELETE SNMP COMMUNITY on page 75
❑ DESTROY SNMP COMMUNITY on page 76
❑ DISABLE SNMP on page 77
❑ DISABLE SNMP AUTHENTICATETRAP on page 78
❑ DISABLE SNMP COMMUNITY on page 79
❑ ENABLE SNMP on page 80
❑ ENABLE SNMP AUTHENTICATETRAP on page 81
❑ ENABLE SNMP COMMUNITY on page 82
❑ SET SNMP COMMUNITY on page 83
❑ SHOW SNMP on page 85
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information about SNMP.