Allied Telesis AT-S60 - Manual (Page 203)

201
Chapter 17
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
❑ DISABLE GARP on page 202
❑ ENABLE GARP on page 203
❑ RESET GARP on page 204
❑ SET GARP PORT on page 205
❑ SET GARP TIMER on page 207
❑ SHOW GARP on page 209
❑ SHOW GARP COUNTER on page 210
❑ SHOW GARP DATABASE on page 212
❑ SHOW GARP GIP on page 213
❑ SHOW GARP MACHINE on page 214
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
You cannot convert a dynamic GVRP VLAN or port to a static VLAN
or port from the command line. That can only be accomplished from
the menu interface. Refer to the AT-S60 Management Software
User’s Guide for background information on GVRP.