Allied Telesis AT-S60 - Manual (Page 59)

AT-S60 Command Line User’s Guide
57
SHOW SYSTEM
Syntax
show system
Parameters
None.
Description
This command displays the following information:
❑ Application software version
❑ Application software build date
❑ Bootloader version
❑ Bootloader version build date
❑ Model name
❑ Switch name
❑ Name of the network administrator responsible for managing
the unit
❑ Location of the unit
❑ Distinguished name
❑ Temperature threshold (Celsius)
For instructions on how to set the name, contact, and location of the
switch, see SET SYSTEM on page 48. For information on setting the
distinguished name, refer to SET SYSTEM DISTINGUISHEDNAME on
page 261. For instructions on how to set the temperature threshold,
refer to SET SYSTEM TEMPTHRESHOLD on page 49.
Example
The following command displays the information about the switch listed
above:
show system