Allied Telesis AT-S60 - Manual (Page 60)

58
Chapter 4
Simple Network Time Protocol
(SNTP) Commands
This chapter contains the following commands:
❑ ADD SNTPSERVER IPADDRESS on page 59
❑ DELETE SNTPSERVER IPADDRESS on page 60
❑ DISABLE SNTP on page 61
❑ ENABLE SNTP on page 62
❑ RESET SNTP on page 63
❑ SET DATE on page 64
❑ SET SNTP on page 65
❑ SET TIME on page 66
❑ SHOW SNTP on page 67
❑ SHOW TIME on page 68
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information on SNTP.